En savoir plus
The turnout decoder can switch up to eight turnouts or eight solenoid-operated articles. If light signals are used, one needs one double-spool relay (Item no.: 10019) per signal. All outputs are short-circuit proof. Overall, the decoder can be loaded with up to 2 A; this also applies to every single connection for the period of one second! The address range is between 1 and 256. The connection is made with two cables onto the two rail profiles.
If a high output is required, of course it is possible to create one’s own supply network, which is supplied out of a booster of its own.
There is a special solution for operating 10775 with the Lokmaus® 2/3. In this case the decoder can be programmed onto the locomotive address and four turnouts created by means of functions F1 to F4. Anyone using a multiMAUS or a RouteControl at a later date, can then use all eight turnout outputs again. We supply our turnout decoder in the standardized DCC system. Here, too there is a variant for the Märklin*-Motorola** format (art. no. 10776) which naturally implies that the Lokmaus® function had to be dispensed with.
Avis client : Décodeur aiguillages / Turnout decoder
Aucun avis n'a été publié pour le moment.